top of page
DPA Lectern / Podium Microphone HIRE
Clean, intelligible sound is key when a speaker is addressing a crowd. d:screet� SC4098 Supercardioid Podium Microphones deliver high intelligibility. This combines controlled directionality with rejection of background noise. These microphones are designed around d:screet� Miniature Microphone Capsules and interference tube technology.

d:screet� SC4098 Supercardioid Podium Microphones are available with a MicroDot connector. This makes them suitable for a wireless setup. No more cables across the stage; simply connect the podium microphone with a wireless transmitter. Your stage setup is more flexible than ever.

d:screet� SC4098 Supercardioid Podium Microphones offer extraordinarily high speech intelligibility and clarity of voice. They provide linear, natural sound combined with an elegant visual look of Scandinavian design.

Features:
Outstanding audio quality
Wireless podium mic capability
Highly directional � very isolated 
High rejection of radio frequency interference   (Daily Hire Rate - See Below for More Information)

DPA Lectern / Podium Microphone HIRE

SKU: DPA-LECT45-H
$55.00Price
    • Directional pattern: Supercardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency range: 20 Hz - 20 kHz
    • Frequency range, �2 dB, 20 cm (7.9 in) 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz
    • Sensitivity, nominal, �3 dB at 1 kHz 16 mV/Pa; -36 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 ?Pa (max. 26 dB(A))
    • Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 71 dB(A)
    • Total harmonic distortion (THD): < 1% up to 125 dB SPL peak
    • Dynamic range: 15 cm (6 in): Typ. 100 dB
    • Max. SPL, peak before clipping: 15 cm (6 in): 134 dB
    • Output impedance: From MicroDot: 30 - 40 ?. From XLR connector or DAD6001 XLR Adapter: 100 ?
    • Minimum load impedance: 2 k?
    • Cable drive capability: Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
    • Output balance principle: Signal balanced with XLR connector og DAD6001 XLR Adapter
    • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
    • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems.
    • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
    • Connector: XLR-M
    • Color:  45 cm (17.7 in): black
    • Weight: 45 cm (17.7 in): 88 grams (3.1 oz)
    • Microphone diameter: 10 mm (0.4 in)
    • Capsule diameter: 5.4 mm (0.21 in)
    • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
    • Temperature range: -40�C to 45�C (-40�F to 113�F)
    • Relative humidity (RH): Up to 90%
  • This item is typically in stock with our supplier and ships within 1-5 Days, though product lead times may vary.

    Please contact us prior to ordering to confirm Availability

bottom of page